CASE STUDY
Roof Cladding Cleaning, Repair and Re-coating
Project Overview
This project involved the full restoration of an ageing industrial roof that had developed significant wear and ongoing corrosion over time. The deterioration was particularly evident along vulnerable areas such as cut edges, where exposure had led to accelerated damage and a decline in overall performance.
The works focused on a complete refurbishment process, including cleaning, targeted repairs and the application of a protective coating system. This approach restored the roof to a consistent, weather-resistant finish while addressing underlying issues and extending the lifespan of the existing structure—providing a cost-effective alternative to full replacement.
Project Details
Sector:
Industrial / Commercial
Service:
Roof Cladding Cleaning, Repair & Re-coating
Scope:
Cleaning, repair of corroded areas (including cut-edge corrosion) and application of protective roof coating system
What the Customer Wanted
A client with an industrial facility presented a common challenge: an ageing roof showing significant wear and ongoing corrosion, particularly on the cut edges of metal roof sheets. This deterioration was both an aesthetic issue and a practical risk—compromising structural integrity and long-term weatherproofing. Water ingress from failing seals or corroded points threatened operational disruption, damage to internal assets, and costly future repairs.
The customer wanted a robust, cost-effective alternative to a full roof replacement that would arrest corrosion, improve weatherproofing, and extend the service life of the existing roof with minimal disruption to site operations. They engaged CJ Paint Spraying to deliver a durable industrial roof spraying solution that revitalised the roof while allowing the facility to remain fully operational.
Project Preparation
A meticulous preparation phase began with a thorough roof inspection by our specialist teams to assess the entire roof area and pinpoint instances of corrosion, biological growth, dirt, and other contaminants. Roof Cleaning & Re-coating: a detailed assessment determined the roof’s condition, and it was then carefully cleaned using a specialised 4000 psi washing system to remove moss, algae, and debris, ensuring minimal disturbance and responsible waste disposal.
Following this general cleaning, cut-edge corrosion received targeted mechanical preparation using hand tools and abrasive methods where necessary to remove heavier corrosion. All prepared areas were cleaned again and treated with a high-performance corrosion-inhibiting primer applied per the manufacturer’s specifications to neutralise existing corrosion and reduce the risk of recurrence. After appropriate curing, an approved roof sealant and protective coating system was applied to the treated areas, with application methods chosen to suit site conditions for consistent coverage and long-term performance.
A comprehensive access and working-at-height management plan minimised disruption to the operational facility. Appropriate access equipment, including Mobile Elevating Work Platforms (MEWPs), full edge protection, and fall-arrest controls were deployed. All operatives were fully trained and site-inducted so works could proceed safely while normal activity continued below.
Services Delivered
Roof Cladding Cleaning
Cut-Edge Corrosion Treatment
Roof Sheet Repairs
On-site Spray Coating Application
Protective Roof Coating System
Surface Preparation & Restoration
The Result
On completion, treated areas underwent rigorous visual inspection to confirm uniform coverage and finish. Access equipment was removed, and the site was left clean and operational. This structured approach—from assessment and high-pressure cleaning to mechanical preparation, corrosion treatment, and controlled application—delivered a durable, weather-resistant protective system that extended the roof’s service life without major disruption.
Planning a similar project?
Speak to our Team Today.
Practical advice and a tailored approach to your project.


