CASE STUDY

Intumescent Coating to Firewall Support Steel

Project Overview

This project involved the application of intumescent coatings to newly installed firewall support steel as part of a larger construction project. The steelwork required a specified level of fire protection to meet building regulations and ensure the integrity of the structure in the event of a fire.

Intumescent coatings expand when exposed to high temperatures, forming an insulating layer that slows heat transfer and protects structural elements. The works focused on delivering a compliant coating system applied to the correct thickness specification, ensuring both fire performance and a consistent, professional finish across all steel components.

Project Details

Sector:
Commercial / Construction

Service:
Intumescent Coating of Structural Steel

Scope:
Application of 60-minute fire-rated intumescent coating to new firewall support steelwork

What the Customer Wanted

CJ Paint Spraying Ltd was commissioned to supply 60-minute intumescent fire protection to new support steelwork installed as part of a firewall project in Didcot. The steel formed part of a fast-track programme, and the client required a practical intumescent coatings solution that fitted around fabrication, installation and site access constraints.

Project Preparation

The work involved internal structural steel supporting a new firewall arrangement wrapped around an existing concrete office building. Early discussions evaluated both on-site and off-site application options, with the agreed approach being an internal water‑based intumescent system suitable for the environment and programme. The client also required assurance that the intumescent coatings would be fully tested, measured and certified on completion.

After reviewing the steel design information and site constraints, we specified a Nullifire 60‑minute intumescent system for the works. As the steel was internal, a water‑based system was selected to deliver the required fire performance without a decorative topcoat. Particular attention was paid to masking at high‑level connections and around base plates where the new steel tied into the existing structure.

The completed application covered a total steel surface area of 303.445 m², with 254.451 kg of Nullifire SC802 applied to achieve the required 60‑minute fire rating. The SteelCalc bill of quantity for the project records the Didcot job as DHF Engineering – Stancold Porche Firewall, with the intumescent build based on Certifire CF5420 and the SteelCalc schedule dated 31 March 2026.

On completion, the project was issued with an intumescent fire protection certificate confirming the structural steel had been coated in line with the required dry film thickness values and the specified 60‑minute performance standard.

See the Transformation

Services Delivered

Intumescent Coating Application (60-Minute Fire Rating)

Fire Protection Coatings for Structural Steel

On-site Paint Spraying

Thickness Control & Compliance Application

Customer-Focused

The Result

Outcome

  • 60‑minute fire protection achieved
  • Internal steelwork coated using Nullifire SC802
  • 303.445 m² of steel protected
  • Full DFT control and certification provided
  • Solution delivered to suit a live project programme and site constraints

Planning a similar project?
Speak to our Team Today.

Practical advice and a tailored approach to your project.