CASE STUDY
Industrial Roof Spraying and Cleaning in Maldon
Project Overview
This project involved the cleaning and respraying of an ageing industrial roof in Maldon that had developed visible wear, corrosion and surface contamination over time. The deterioration was affecting both the appearance and the long-term condition of the roofing system.
The works focused on thoroughly cleaning the roof to remove built-up debris and failing coatings before applying a protective spray system. This approach restored the roof to a clean, uniform finish while improving durability and extending its lifespan without the need for full replacement.
Project Details
Location:
Maldon
Sector:
Industrial
Service:
Industrial Roof Cleaning & Respraying
Scope:
Cleaning, preparation and spray coating of ageing industrial roof to restore protection and extend lifespan
What the Customer Wanted
A client with an industrial facility presented a common challenge: an ageing roof structure exhibiting significant signs of wear and tear. They approached CJ Paint Spraying Ltd seeking a specialised solution to address these issues comprehensively. Their primary concern revolved around ongoing corrosion, particularly visible on the cut edges of the metal roof sheets. This degradation was not only an aesthetic concern, detracting from the professional appearance of their premises, but also a practical one. Unchecked corrosion directly compromises the structural integrity of the roof and, critically, its ability to provide long-term weatherproofing. Water ingress resulting from failing seals or corroded points could lead to operational disruptions, damage to internal assets, and costly repairs in the future.
Beyond arresting the immediate corrosion, the customer’s overarching objective was to improve the roof’s long-term weatherproofing capabilities and, crucially, to extend the overall service life of the existing roof structure. They were keen to explore alternatives to a full roof replacement, recognising that such a project would entail significant capital expenditure and, more importantly, considerable disruption to their critical site operations. Therefore, the client sought a robust, cost-effective intervention through our industrial roof spraying expertise that would revitalise their roof without interrupting their daily business activities. Our role was to deliver a durable, reliable solution that met these exacting requirements, ensuring their facility remained protected and operational for years to come.
Project Preparation
Addressing the specific requirements of the industrial facility necessitated a meticulously organised and executed project preparation phase, foundational to successful industrial roof spraying. Our initial step involved a thorough roof inspection, conducted by our specialist teams, to comprehensively assess the entire roof area. This detailed evaluation allowed us to pinpoint all instances of ongoing corrosion, identify areas of biological growth, accumulated dirt, and other surface contaminants. Understanding the exact condition of the roof was paramount for formulating an effective treatment strategy, ensuring every vulnerable point was identified and accounted for. Following this assessment, the roof surface underwent intensive preparation. This involved controlled high-pressure jet washing across the entire roof area. This specialised cleaning process was crucial for removing all embedded dirt, moss, lichen, and other atmospheric pollutants that had built up over time. Achieving an impeccably clean and contaminant-free substrate is absolutely vital to ensure optimal adhesion and long-term performance of the subsequent protective coatings and sealants in any industrial roof spraying application.
Parallel to the general cleaning, a targeted approach was taken for the prevalent cut-edge corrosion. Corroded metal roof sheet cut edges were mechanically prepared using hand tools, with localised use of abrasive preparation where required to remove heavier corrosion. All prepared areas were then meticulously cleaned again and treated with a high-performance corrosion-inhibiting primer. This application was performed in strict accordance with the manufacturer’s specifications, providing an essential foundation layer to neutralise existing corrosion and prevent its recurrence. Following this crucial preparation and appropriate curing of the cut-edge treatment, an approved roof sealant and protective coating system was applied to the treated areas. Application methods were carefully selected to suit specific site conditions, ensuring consistent coverage, maximum durability, and long-term performance.
Furthermore, a comprehensive access and working at height management plan was integral to our preparation. Given the operational nature of the facility, all works were carefully planned to minimise disruption. This included the strategic deployment of appropriate access equipment, such as Mobile Elevating Work Platforms (MEWPs), ensuring safe and efficient reach across the roof. Full edge protection and robust fall-arrest controls were meticulously put in place. All operatives involved were fully trained and inducted, enabling the works to proceed safely and seamlessly, crucially allowing normal site activity to continue uninterrupted below.
Services Delivered
ndustrial Roof Cleaning
Roof Preparation & Coating Removal
On-site Spray Coating Application
Corrosion Treatment & Surface Stabilisation
Protective Roof Coating System
Long-Term Roof Preservation
The Result
Upon completion, all treated areas underwent a rigorous visual inspection to confirm uniform coverage and finish. Access equipment was then removed, and the site was left clean, tidy, and fully operational. This meticulous preparation, from assessment and cleaning to safety protocols and the final application, laid the groundwork for a successful and enduring industrial roof spraying treatment, providing a durable, weather-resistant protective system.
Planning a similar project?
Speak to our Team Today.
Practical advice and a tailored approach to your project.

















